A special 2-component, light grey, epoxy that fills gaps of up to 800 mils without sagging. This makes it perfect for profiling above and below the waterline on steel, aluminium and composite hulls.
A two-part epoxy filler that can be used above the waterline to the surface prior to applying topside finishes, and can be used to fill pinholes between coats of two-part polyurethanes, due to its ability to trowel to a very line, smooth finish. Interfill Epoxy Filler can also be used below the waterline to fill blisters and as part of a keel fairing system.
If Interfill Epoxy Filler is used below the waterline it must be overcoated with four coats of Interprotect 2000E/2001E. The cured epoxy has excellent solvent resistance and will not be attacked by the strong solvent in two-part polyurethanes or epoxies.
NOTE: Interfill 830 is a TWO PART epoxy. In order for this product to work properly, a Reactor (fast or standard cure) MUST be purchased in addition to the Base.
